Cesta
0 productos
 
Más Vendido
 

1000:1 Micro Metal Gearmotor HP

Volver
1000:1 Micro Metal Gearmotor HP
Click para ampliar
Disponibilidad: En Stock
Modelo: 1595
Puntuación media: No votado

These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with four different motors: high-power with long-life carbon brushes (HPCB), high-power with shorter-life precious metal brushes (HP), medium-power (MP), and low-power. The HPCB version (shown on the left in the picture below) can be differentiated from versions with precious metal brushes (shown on the right) by its copper-colored terminals and slightly less shiny case. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).

Escriba reseña
Su Nombre:


Su Opinión: Nota: no se permite HTML!

Valoración: Malo            Bueno

Introduzca el código a continuación:

No hay imágenes adicionales para este producto.